Most recent digital camera and imaging news items - RSSDigital camera and imaging news items - HTML

Panasonic releases firmware version 1.1 for the DMC-L10

Panasonic releases firmware version 1.1 for their DMC-L10 digital SLR camera. This update provides the following functions and improvements:
• Improved the AF performance with some Panasonic lenses.  
• Improved night scene performance of Auto Exposure.
• Improved the performance of Auto White Balance.
• Shortened the minimum shooting intervals.
• Enabled the Front/Rear dial operations in the fine white balance adjustment and the change of magnifying position on the MF Assist in Live View mode...
Goto the Panasonic DMC-L10 firmware download pageDetailed overview:

1. Improved the performance of AF(Auto Focus) with Panasonic lenses. (Model Number L-ES014050,L-RS014150).
2. Improved the performance of AE (An accuracy improvement of Auto Exposure at night scene).
3. Improved the performance of AWB(Auto White Balance).
4. Shortened the minimum shooting intervals on the single shooting mode.
5. Enabled the Front/Rear dial operations in the fine white balance adjustment and the change of magnifying position on the MF Assist in Live View mode.


Reading the current firmware version.

Panasonic recommends that you update the firmware in your camera if either of the following conditions exists:
A: If the firmware version is not displayed on the LCD using the following procedure, please update firmware.
B: If the firmware version indicated is older than the version being offered, please update firmware.
The firmware updating is not necessary if the firmware version on your camera is newer than listed on this service.

• Mount the lens onto the camera body and then insert the SD Memory Card or the SDHC Memory Card.
• Set the camera's power switch to ON.
• Press the MENU/SET button .
• Go to the SETUP menu page 3. (Fig.1)
• Select the "Version DISP." then press  button.
• The screen shows (Fig.2 )
• BODY FIRMWARE:Information of camera body Firmware version.
• LENS FIRMWARE:Information of lens Firmware version.

Set the power switch to OFF, after checking this.

Additional information: Goto the Panasonic DMC-L10 firmware download page
December 17, 2007
go to top of page