Most recent digital camera and imaging news items - RSSDigital camera and imaging news items - HTML



Olympus and Kodak Agree to Implement 4/3 System Digital SLR Camera Standard






Olympus and Kodak Agree to Implement 4/3 System Digital SLR Camera Standard - digital camera and photography news

PRESS RELEASE

Olympus and Kodak Agree to Implement 4/3 System Digital SLR Camera Standard

• First-of-its-kind common standard for digital cameras

• Secures lens mount compatibility among manufacturers

• New Universal Digital Interchangeable Lens System Forum to be established


Cologne, 24 September 2002 – Olympus Optical Co., Ltd. of Japan and Eastman Kodak Company of the United States today announced that they have agreed to implement the Four Thirds System (4/3 System), a new standard for next-generation digital SLR camera systems that ensures interchangeable lens mount compatibility. The two companies have resolved to aggressively implement this new standard in their respective product lines, and to establish the Universal Digital Interchangeable Lens System Forum, an industry forum that will promote acceptance of the Four Thirds System by other camera manufacturers. Fuji Photo Film Co., Ltd. has already agreed to participate in the new standard.

System Overview
The Four Thirds System is not based on existing standards for 35 mm film SLR camera system lenses, but instead establishes a new common standard for the interchange of lenses developed exclusively to meet the optical design requirements of digital SLR cameras.

4/3-Inch Image Sensor Size
The Four Thirds System uses a 4/3-type CCD or other image sensor, and will facilitate the development of dedicated digital camera lens systems that maximise image sensor performance and ensure outstanding image quality while also being smaller than 35 mm film SLR camera lens systems.

Lens Mount Standardisation
By establishing an open standard for camera body lens mounts, the new system will make it possible to standardise lens mounting systems, something that has been impossible to achieve with digital SLR cameras that are based on existing 35 mm film SLR lens systems. At the same time, the new system standard will set a rule for both the image circle size (the diameter of the area in which the subject is resolved) and the back focus distance (the distance from the lens mount to the image sensor).

Development Background of the New Standard
Current digital SLR cameras with interchangeable lenses are essentially based on conventional 35 mm camera systems. As a result, they must be equipped with image sensors that are comparable in size to 35 mm and APS film. However, because the imaging characteristics of these large CCDs are fundamentally different from those of film, a number of issues can prevent them from achieving their full performance potential. These include: (1) Although film is capable of responding to light striking the surface at a high angle of incidence, a high angle of incidence can prevent sufficient light from reaching sensor elements at the periphery of a CCD and result in reduced colour definition, particularly when shooting with wide-angle lenses. (2) To achieve the resolutions required by the micron pitch of today's CCDs, the demands of optical design tend to result in the use of larger and heavier lenses.

Moreover, manufacturers of digital SLR camera systems have until now adopted the mounting systems used in their own respective 35 mm film SLR cameras, making bodies and lenses produced by different manufacturers incompatible with one another.

In light of these circumstances, the new Four Thirds System standard was conceived to facilitate the design and development of digital SLR cameras and lenses that maximise the performance potential of digital imaging sensors, and provide users with product advantages such as compact size, handling ease, and enhanced functionality.

Benefits
The major benefit of the Four Thirds System is that it allows the design of dedicated, high-performance digital camera lens systems that are more compact than 35 mm film SLR camera lens systems. The impact of the more compact lens size will be especially marked on telephoto lenses, making it possible to produce a Four Thirds System 300 mm telephoto lens, for example, that offers performance equivalent to a 600 mm lens on a
35 mm film SLR camera. In other words, it will be possible to offer the same angle of view in a lens that is only about half as long. Besides telephoto lenses, the 4/3-type image sensor size will also allow the development of bright, high-performance zoom lenses that are more compact than those needed for use with image sensors the size of APS or 35 mm film.

By taking advantage of the more compact lens size, it will therefore be possible to develop lens systems that are much easier to handle than conventional 35 mm film SLR camera lens systems.

Furthermore, this Lens Mount Standardisation will make it possible for consumers to combine bodies and lenses produced by different manufacturers and therefore enjoy a wider product choice.



If you have any questions or would like additional information, please contact:

Hans Thiele

Olympus Optical Co. (Europa) GmbH

Corporate & Imaging Systems Europe

Marketing Communications

Tel.: +49-40-237 73-263

email: hans.thiele@olympus-europa.com



Christina Blake

Olympus Optical Co. (Europa) GmbH

Corporate & Imaging Systems Europe

Marketing Communications

Tel.: +49-40-237 73-191

email: christina.blake@olympus-europa.com
September 24, 2002
go to top of page