|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Nikon releases D2H firmware update version 2.0.1
|
|
Following the recent announcement of the Nikon D2Hs, Nikon now releases firmware version 2.0.1 for the D2H SLR camera, fixing the following problems: the camera sometimes freezes, a delay before the shutter release, a problem with focus mode, a problem preventing the saving the WT-1 settings, Wireless LAN>Transceiver option was inadvertently set to Off, incorrect character displays in various menus...
|
|
|
|
|
|
|
|
|
PRESS SUMMARY |
What is new/Content Description
- The D2H sometimes froze with uninterrupted navigation between a number of photographs while playback zoom was activated. This problem has been corrected.
- When Image review in the playback menu was set to On and a photograph taken just after the camera stopped metering exposure (Auto meter-off activated) was displayed in the camera monitor, there was a significant delay before the shutter was released when the shutter-release button was pressed while this photo was displayed. This problem has been corrected.
- When AF-area mode was set to Group dynamic-AF and a6 Focus area illum* in the CSM menu was set to When selected>1 s, the focus area was illuminated for 1 second with a half-press of the shutter-release button. This problem has been corrected.
- A problem that prevented saving of WT-1 settings when the WT-1 was connected to the D2H has been corrected. This problem occurred with the following operations:
. The Wireless LAN>Transceiver option was set to Off after connection to an FTP server. WT-1 settings were then adjusted and the D2H was turned off.
. The Wireless LAN>Transceiver option was set to Off after connection to an FTP server. WT-1 settings were then adjusted, Transceiver set to On and then set to Off while connecting to a server, and the D2H was turned off.
- Incorrect character displays in Spanish, Chinese, and German menus have been corrected.
- The following problem that occurred when the camera was controlled from Camera menu>Custom Settings… in Nikon Capture 4 has been corrected. (Macintosh only)
- When the Aperture setting option in f5 Command dials was switched from Aperture ring to Sub-command dial, Nikon Capture 4 Camera Control sometimes quit unexpectedly or displayed an inconsistent aperture value.
*Focus area illum is Custom Setting a5 with D2H firmware version 1.0. |
Additional information: Nikon D2H firmware version 2.0.1 download pages |
| February 21, 2005 |
 |
|
|
|
|
|
